The quickest way to turn off the dishwasher is to switch it off at the mains plug but it is not recommended. Before you switch off the main power source be sure to press the off button on the appliance itself first. Always cancel the current cycle before cutting the power supply.
But what should you do if the dishwasher is running and you wish to turn it off or stop the cycle? We will now discuss these options and what best to do in each situation.
How To Turn Off a Dishwasher Mid-Cycle?
Most modern dishwashers on the market today have a pause button on the display board. When pressed, the pause function will stop the dishwasher from running. This will allow you to open it to load any forgotten dishes. After you close the dishwasher door then you can un-pause it and the cycle will continue as normal.
If your dishwasher is experiencing issues or you spot a leak, pause the dishwasher then cancel the cycle. Once canceled, the dishwasher will drain any excess water. Now you can clear the washer ready to check for issues and fix it if needed.

Quickest Way To Stop a Dishwasher?
The quickest and easiest way to stop a dishwasher mid cycle is to open the door. This will cause the washer to pause straight away. Most people think that their dishwasher fills up to the top with water and that’s why they cannot open the door mid cycle.
This could not be further from the truth. A dishwasher will fill up the base with water, usually around 1 inch of water depending on the model. The spray arms will activate to spray the water around the inside and onto the dirty dishes.
Beware when you close the door again the dishwasher will resume from where it left off unless you cancel the cycle. If you open the door suddenly due to a leak, make sure you cancel the cycle right away before you forget.
Yes, it’s recommended to leave the door open for a while after running a dishwasher to allow air to circulate and dry the inside. Leaving the door closed will cause a hot and damp environment within it, in the long term this can cause build up of mold and mildew.
As a result of this you will need to clean the inside more often to eliminate any mold.
Do You Have To Manually Turn Off a Dishwasher?
After using the dishwasher the appliance will go into a standby mode and in most cases you will not need to turn it off after every use. If you wish to turn off the dishwasher, press the off button on the control panel to turn it off or cut the main power supply off at the plug.
To reboot the dishwasher to solve any issues it may be to cut the power from the plug and wait at least 60 seconds before turning it back on. The dishwasher will now reboot and hopefully solve any issues you may be having.
If you are having issues causing you to stop the dishwasher, consider contacting your local repair engineer.
Related Articles: